→400kN单板层积材结构木材力学性能试验机，用于LVL层积材拉伸弯曲力学性能试验、LVL层积材抗弯强度和弹性模量试验、规格材拉伸弯曲力学性能试验、PSL平行积成木拉伸弯曲力学性能试验、胶合层积木拉伸弯曲力学性能试验、木结构部件拉伸弯曲力学性能试验、框架部件拉伸弯曲力学性能试验。

→500kN单板层积材结构木材力学性能试验机，用于结构集成材抗拉试验、承重集成材抗拉强度试验、层积胶合集成材抗拉强度试验、指接集成材抗拉强度试验、斜接集成材抗拉强度试验、拼宽集成材抗拉强度试验；

→500kN单板层积材结构木材力学性能试验机，测试木材含水率顺纹抗拉强度、横纹抗拉强度、顺纹抗压强度和弹性模量、木材顺纹抗剪强度、接缝抗剪强度、木材弯曲强度和弹性模量。

→500kN单板层积材结构木材力学性能试验机，测试木材垂直抗压承载力、木材抗拉承载力、木材横向承载力、木材原材扭转刚度。测定木结构部件压缩性能、扭转特性、抗剪性能。

→HRJ单板层积材结构木材力学性能试验荷载300kN/500kN，木材弯曲强度试验间距＞9000mm。

→HRJ-Test单板层积材结构木材集成材拉压特性试验机中英文测试软件。

→500kN单板层积材力学性能试验机；LVL结构木材力学性能试验机；结构LVL工程木力学试验机；LVL层积材抗弯强度试验机；胶合层积板材弹性模量试验机；木结构规格材弹性模量试验机；APA PS 1-09厚度方向抗剪强度试验夹具；AS/NZS 4357.2结构单板层积材LVL结构性能试验方法测定；AS/NZS 4063.1:2010结构木材的特性试验方法；AS/NZS 4266.0人造木基板材测试方法标准；AS/NZS 4266.5弯曲强度和弯曲模量；AS/NZS 4266.6内结合强度；AS/NZS 4266.7表面结合强度；AS/NZS 4266.8吸水厚度膨胀；AS/NZS 4266.9胶粘质量；AS/NZS 4266.10湿弯强度；AS/NZS 4266.11循环后内结合强度和弯曲强度；AS/NZS 4266.13握螺钉力；AS/NZS 4266.14尺寸稳定性；AS/NZS 4266.20耐磨性；AS/NZS 4266.24耐开裂性；AS/NZS 4266.27冲击性能；AS/NZS 4266.28粘合强度；AS/NZS 2098.3弯曲强度；AS/NZS 2269.1 7.2弹性和刚性模量；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：APA EWS S550；GSO ISO 10033-2-2015；ISO 10033-1-2011；ISO 12578-2016；ISO 12579；ISO 12580；ISO 18375-2017；ANSI/AITC A 190.1；ASTM D3737-2012；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2017；EN 1912-2012；EN 1193；EN 1194；EN 338-2016；EN 14081-1-2011；EN 384-2016；EN 12369-2-2011；EN 12369-3；EN 520；EN 16737-2016；EN 14566；EN 15283-2；EN 14272-2011；ASNZS 1328.1；AS/NZS 1328.2；AS/NZS 1604.5；AS/NZS 2269.0-2015；ASTM D1038-2011；ASTM D3498-2011；ASTM D3499-2011；ASTM D5516-2017；ASTM D6305-2015；ASTM D7341；ASTM D4688；AS/NZS 1577-2018；ISO DIS 16892-2；EN 310；EN 312；EN 314-1；EN 314-2；EN 319；EN 300；EN 14080；轻型木结构连接件通用技术条件轻型木桁架技术规范；石膏板系统用机械紧固件试验方法；应力分级木材；结构胶合层压板强度等级测定；装配式木结构建筑技术荷载规范；高温下经耐火处理的软木胶合板弯曲性试验方法；石膏纤维板力学性能试验机；地板系统木框胶粘剂强度试验机；木基紧密板材机械力学性能试验机；建筑工程方木原木结构设计；受弯木结构力学性能检验方法；轻型木结构锯材用原木检验；结构用人造板刨花板木质复合材锯材力学性能试验机；胶合板屋面板结构规格力学韧性弯曲强度试验机；木结构工程施工质量验收规范；木结构剪力墙静载和低周反复水平加载试验方法；结构用木材强度等级检验测试胶合木结构技术规范木结构试验方法；指接材用结构胶黏剂胶合性能测试方法；多高层木结构建筑技术标准；建筑工程承重胶合木结构设计；胶合纤维人造板木工板木质地板结构板力学试验机；原木锯材批量检查抽样判定方法；轻型木结构用指接规格材；规格材目测分级规则；规格材材质等级检验方法；建筑工程轻型木结构设计；带矩形横截面的强度分级结构木材结构木材机械性能测定；木材抗弯强度弹性模量顺纹抗剪抗拉强度硬度抗劈力横纹抗压弹性模量测定；结构用人造板材料木质覆面板力学荷载强度性能试验机；结构用木材金属紧固件连接试验纵接性能测试方法；结构木材集成材理化力学特性试验机；600kN木结构原木板材力学性能试验机；1000kN木结构荷载强度试验机；100kN人造板材胶合板防火板万能试验机；长试样人造板材大跨度抗折弯曲强度试验机；2kN石膏板断裂荷载硬度试验机；100kN模压托盘力学性能试验机；5N.m500N金属接骨螺钉自攻力扭矩试验系统；HRJ-20kN石膏砌块断裂荷载试验机；HRJ-615木板材在线厚度自动测量系统；500kN线缆拉力试验套管成型快速液压机；HRJ-N150夹扭剪切钳抗弯扭力剪切性能试验机；滚刀刀圈耐磨粒磨损抗冲击疲劳试验机；传动轴联轴器力矩限制器打滑力矩标定测试系统； 500kN.m联轴器扭矩预磨标定刚度疲劳试验台；联轴器膜片拉弯扭三维动力荷载疲劳试验系统；300kN双缸举升吨袋提吊加压跌落试验机；600kN电子加载叠加力标准机；6MN液压加载叠加力标准机；100kN拉压式工作测力仪校准检定装置；100kN铁路接触网张力测量仪校准装置；1000kN全自动炸药压制成型强度试验机；弹簧拉压扭转疲劳刚度性能试验机；微机控制弹簧拉压试验机；双工位螺旋弹簧气弹簧拉压试验机；600kN微机控制弹簧拉压试验机；恒瑞金试验机；10kN微机控制气弹簧拉压试验机；QTW-300kN强力氮气弹簧试验机；1kN气压棒拉压试验机；3000kN机车车辆弹簧试验机；200kN弹簧横向刚度载荷试验机；弹簧垂向动态刚度试验机；ASR-300kN空气弹簧刚度气密性试验机；动车悬挂系统空气弹簧水平大位移循环载荷试验机；300kN铁路车辆空气弹簧静态刚度试验台；300kN空气弹簧二维刚度疲劳试验机；200kN橡胶应急弹簧二维刚度疲劳试验机；300kN车辆缓冲器圆弹簧试验机；100kN车钩缓冲器螺旋弹簧拉压试验机；1000kN钢制螺旋弹簧压力试验机；3000kN铁道车辆缓冲器静压试验机；悬架空气弹簧高低温台架疲劳寿命试验机；驾驶室空气弹簧高低温疲劳寿命试验机；三工位空气弹簧高低温疲劳耐久性试验机；300kN钢板叶片弹簧刚度变形压力试验机；50kN弹簧套管扶正器试验机；20kN 弹簧疲劳试验机；十工位螺旋弹簧疲劳试验机；2工位气压棒疲劳试验机；300kN空气弹簧高低温疲劳试验机；多工位空气弹簧疲劳试验机；多工位螺旋弹簧高低温疲劳试验机；5N.m全自动弹簧扭转试验机；100N.m涡卷弹簧扭转疲劳试验机；弹簧减震器示功特性试验机；油浸式变压器波纹储油柜疲劳试验台；变压器波纹储油柜耐压试验变形自动检测装置；10000N.m300kN绝缘子拉压弯扭试验系统；20000N.m500kN高压电力绝缘子组件拉压弯扭测试系统；CST500kN电线电缆卧式拉伸试验机；50kN线夹对地线导线握力试验机；DL/T765.3-2021架空配电线路金具；额定电压35kV及以下架空绝缘导线金具；500kN线缆拉力试验套管成型快速液压机；电力电子能源动力电气工程测试系统；弹簧自动化智能测试系统；20kN铁矿球团全自动压力试验系统；缓冲垫板动静刚度疲劳测试系统；100kN垫板动刚静刚度疲劳性能试验机；GB/T38695-2020 城市轨道交通无砟轨道技术条件；100kN隔离式减振垫动静模量疲劳性能试验机；100kN弹簧隔振器静刚度试验机；浮动油封泥沙腐蚀磨损模拟工况测试系统；浮封冷热交变高低温工况磨损性能测试系统；

LVL Structural Timber Mechanical Properties Tester；Structural Glued Laminated Timber Tensile Compressive Strength Tester；Structural laminated veneer lumber (LVL) Determination of structural properties Test methods； Large Span Artificial Board Flexural Tester；Wood Timber Artificial Board Testing Machine；MDF Artificial Board Tester；Wood-based Panels Large Span Flexural Tester；Impact Tester of Wood-based Panels；Structural Timber Characterization Tester；Characterization of structural timber Test methods；Dimension Lumber Characterization Tester；Standard for methods testing of timber structures；Timber structures Glued laminated timber Strength classes and determination；Structural timber Determination of characteristic values of mechanical properties and density；Assembled plywood case Mechanical Properties Tester；Standard Specification for Evaluation of Structural Composite Lumber Products；Scaffold decking components Mechanical Properties Tester；Standard for methods testing of timber structures；Method of testing in bending strength of wood；Method for determination of the modulus of elasticity in static bending of wood；Method of testing in shearing strength parallel to grain of wood；Methods of testing in tensile strength parallel to grain of wood；test method for compressive strength of the transverse fiber；Method of Testing in Cleavage Strength of Wood；Modulus of Elasticity in Compression Perpendicular to Grain of Wood；Laminated veneer lumber Mechanical Properties Tester；Laminate flooring Mechanical Properties Tester；Determination of mechanical properties of wood based panels；Plywood Bonding quality Test methods；tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Polyvinyl acetate emulsion adhesives for woods；Glued laminated bamboo flooring Mechanical Properties Tester；Stress-graded Timber Tester；Bending Strength and Apparent Modulus of Elasticity；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；Code for design of timber structures；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Log for lumber in light wood frame construction；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Characteristic values for strength stiffness density；Structural timber-Strength classes test；Strength graded structural timber with rectangular cross section； Gypsum plasterboards Definitions requirements and test methods；Structural timber Visual strength grading of tropical hardwood；Plywood-Calculation method for some mechanical properties；Gypsum Blocks Breaking Load Tester；Wood-based Panel Online Automatic Thickness Measurement System；Couplings Torque Pre Grinding Calibration Stiffness Fatigue Test Bench；Double Hydraulic Cylinder Lift FIBC Automata Load Drop Tester；Spring Tension Compression Torsion Fatigue Stiffness Properties Testing Machine；Battery Spring Tester；Sofa Spring Tester；HRJ Tester；Micro Spring Tester；Little Spring Tester；Load switch Spring Tensile Compression Tester；Circuit-breaker Spring Tensile Compression Tester；Spring Clamp Compression Stiffness Tester；Wavy Plate Spring Compression Tester；Side Ripple Spring Compression Stiffness Tester；Computer Spring Tensile Compression Testing Machine；Two Spring Tensile Compression Tester；Computer Gas Spring Tensile Pressure Tester；Nitrogen Gas Spring Pressure Tester；Gas Springs Tensile Compression Tester；Main Steam Safety Valve Spring Load Tester；Vehicle Spring Compression Tester；Spring Transverse Stiffness Tester；Spring Transverse Stiffness Load Tester；Spring Vertical Dynamic Stiffness Tester；Air Spring Stiffness Air Tightness Tester；Air Spring Vertical Horizontal Transverse Stiffness Fatigue Tester；Railway Vehicle Air Spring Static Stiffness Testing Machine；Air Spring Two-Dimensional Stiffness Fatigue Tester；HRJ Tester；Rubber Spring Two-Dimensional Stiffness Fatigue Tester；Spring bumper Tension Compression Tester；Steel Helical Spring Compression Tester；Railway Bogie Coil Spring Tester；Railway Vehicle Draft Gears Static Load Tester；Air Suspension Air Spring High Low Temperature Fatigue Life Tester；Commercial Vehicles Cab Air Spring Fatigue Life Tester；High Speed Train Shock Absorber Fatigue Life Tester；jn-syj；Railway Vehicle Shock Absorber Fatigue Life Tester；Helical Spring Compression Testing Machine；Coil Spring Compression Tester；HRJ Tester；Automobile Leaf Spring Compression Tester；Bow-spring Casing Centralizers Tester；Multi position Spring Fatigue Tester；Ten Position Helical Spring Fatigue Tester；Mattress Spring Fatigue Life Tester；Helical Spring High Low Temperature Fatigue Tester；Multiposition Helical Spring High Low Temperature Fatigue Tester；Gas Spring High Low Temperature Fatigue Tester；Desktop Spring Torsion Tester；Computer Spring Torsion Tester；Spiral Spring Torsion Fatigue Tester；spring shock absorber force-displacement characteristic tester；Explosive Material Compression Molding Strength Tester；Pliers and Nippers Bending Torsion Shear Force Tester；Oil-immersed Transformer Corrugated Oil Storage Tank Fatigue Test Bench；Transformer Ripple Oil Conservator Withstand Experimental deformation Automatic detection Device；Composite Insulator Component Tension Compression Bending Torsion Test System；Composite Insulator Component Tension Compression Bending Torsion Test System；Electric Cables and Wires Horizontal Tensile Testing Machine；Clamp grip force on ground wire conductor Tester；Composite Insulator Core Stress Corrosion Tester；Cable Tension Test Sleeve Forming Rapid Hydraulic Machine；Power Electronics Energy Power Electrical Engineering Test System；