JB/T 3338-2013液压件圆柱螺旋压缩弹簧特性试验Hydranlic Cylindrically Helical Compression Spring Tester
来源:www.jn-syj.com 发布于:2019/12/2 13:40:23 点击量:
JB/T 3338-2013液压件圆柱螺旋压缩弹簧特性试验:指定高度或变形量下的负荷,弹簧变形量应在试验负荷下变形量的20%~80%之间。测量弹簧刚度时,弹簧变形量应在试验负荷下变形量的30%~70%之间。jn-syj.com;圆柱螺旋压缩弹簧永久变形试验,将弹簧用试验负荷压缩3次后,其永久变形应不大于自由高度H0的0.25%。
JB/T 3338-2013液压件圆柱螺旋压缩弹簧技术条件,规定了液压件圆柱螺旋弹簧永久变形试验、指定高度下的负荷测定、指定变形量下的负荷测试、弹簧刚度测定。JB/T 3338-2013适用于弹簧材料直径≤16mm的液压元件用圆柱螺旋压缩弹簧。200N液压件弹簧试验机;HRJ Spring Tester;10N~100kN弹簧拉压试验机;100kN~300kN弹簧拉压试验机;300kN~1000kN弹簧压力试验机;50kN弹簧拉伸冲击试验机;50kN多工位弹簧疲劳试验机;0.5N.m~100N.m液压弹簧扭力试验机;100N.m~3000N.m弹簧扭转疲劳试验机;2kN油门踏板弹簧试验机;3kN转向器弹簧试验机;30kN液压截止阀弹簧试验机;300kN弹簧刚度试验机;500N喷油器弹簧试验机;jn-syj.com;50kN减震器弹簧试验机;500kN车辆弹簧试验机;30kN油封弹簧试验机;100kN液压泵缸体弹簧试验机;50kN柱塞泵弹簧试验机;200kN马达弹簧试验机;300N压滤机弹簧试验机;5kN刹车弹簧试验机;
ISO 16840-2;ISO 16840-3;ISO 7176-15;ISO 7176-26;HRJ Spring Tester;ISO 8458-2;ISO 10069;JIS E 4206;EN 13298;GB/T18029.15-2008;GB/T18029.26-2014;GB/T30661.2-2014;JT/T460;QC/T805-2008;QC/T831-2010;QC/T844-2011;HRJ Spring Tests;GB/T30661.3-2015;JB/T7796-2017;JB/T12792-2015;JB/T12793-2015;jn-syj.com;GB/T1222-2016;GB/T33164.2-2016;GB/T2940;JB/T10416;JB/T10417;GB/T1358;JB/T3338-2013;GB/T1973.1;GB/T1973.2;GB/T1973.3;GB/T4357;YB/T5063;YB/T5310;TB/T2211;GB/T1805;JB/T12791-2016;JB/T6655-2013;JB/T7944-2013;
Hydranlic Cylindrically Helical Compression Spring Tester;Technical specifications;Piston pump Spring Compression Tester;Piston pump Spring Tester;HRJ Spring Tests;Water Hydraulic Axial Piston Pump Spring;Piston pump mainly by the piston in the pump cylinder for reciprocating motion to breathe and remove the liquid;Driven by Pressure and Servo Motor Tester;Closed-cycle hydraulic piston pump;Spring Tensile Tester;Spring Compression Tester;Mould Coil Spring Tester;Tools for pressing;HRJ Spring Tests;Compression springs with rectangular section;Spring Fatigue Testing Machine;Spring Torsion Fatigue Tester;Spring Stiffness Tester;Spring Transverse Stiffness Tester;Housing dimensions and colour coding;High Temperature Spring Fatigue Tester;Gas Spring Fatigue Tester;High Temperature Spring Tester;Low Temperature Spring Fatigue Tester;Two-position Spring Tester;Helical Spring Compression Tester;Coil Spring Fatigue Tester;jn-syj.com;Spring Transverse Load Tester;Side Ripple Spring;Battery Spring Tester;Sofa Spring Tester;Circuit-breaker Spring Tester;Air spring Stiffness Tester;Bow-spring Casing Centralizers Tester;Spring bumper Tester;Helical Spring Compression Tester;Automobile Leaf Spring Compression Tester;Horizontal Spring Torsion Tester;Table top Spring Tester;Vertical Spring Tester;Torsion-Bar Spring Fatigue Tester;Switch Spring Tester;Clock spring Tester;HRJ Spring Tests;Hydraulic Spring Tester;Seal element Spring Tester;China Spring Tester;Asia Spring Tester;World Spring Tester;Various Testing Machine;Laboratory Equipment;Tester Service Center;Tester Fittings Supply Center;Test Accessories Design Manufacture Center;Special Test Accessories Center;Testing Machine Accessories;Material Tester Attachment;Material Tester Fixture;HRJ Testing Machine;
济南恒瑞金试验机有限公司;弹簧试验机制造商;山东省力值硬度计量委员
(试验机服务中心)(试验机配件供应中心)(特殊夹具定制中心)
相关阅读
- GJB国军标弹簧规范及标准 HRJ2015-09-14
- GB/T13061-2017商用车空气悬架用空气弹簧技术规范Spring Tester2018-04-08
- TB/T211-2018机车车辆用压缩钢制螺旋弹簧Steel Helical Spring Test...2019-07-08
- GB/T23858-2009检查井盖(Manhole cover﹚分为人孔和非人孔两种;人孔规格尺寸...2015-03-23
- 压缩弹簧 什么时候加速度最大2013-04-23
- 2015环保部部令第33号 建设项目环境影响评价分类管理名录 (一)2015-04-21