GB/T26899-2011结构用集成材抗拉试验，试件长度要大于2400mm，保证在抗拉试验时，夹具间距离大于2400mm，试件两端夹持部分长度应大于300mm，平均加载速度不大于10MPa。

300kN结构集成材抗拉强度试验机；含水率12％时顺纹抗拉强度试验；300kN阔叶材抗拉强度试验；300kN针叶材抗拉强度试验；hrjtest；结构用集成材物理性能试验机；结构用集成材质量控制方法；承重集成材抗拉强度试验机；层积胶合集成材抗拉强度试验机；指接集成材抗拉强度试验机；斜接集成材抗拉强度试验机；拼宽集成材抗拉强度试验机；结构用集成材胶合性能试验机；集成材抗弯性能试验机；结构用集成材主要物理性能检测；国家和地区结构用集成材强度等级对应关系；300kN集成材试验机测试抗拉强度、抗压强度和弹性模量、弯曲强度和弹性模量；hrjtest；300kN规格材拉伸试验机；600kN结构木材试验机；HRJ-Test英文版集成材测试软件；100kN大跨度木材强度试验机；120kN长木材强度试验机；1000kN木结构强度试验机；GB/T20240-2017竹集成材地板；hrjtest；GB/T21140-2017非结构用指接材；JG/T464-2014集成材木门窗；LY/T1927-2010集成材理化性能试验方法；LY/T2711-2016单板用竹集成材；LY/T1787-2016非结构用集成材；APA EWS S550-2005集成材工字梁；ASTM D5055-2013木制工字梁结构能力确定；ASTM D3528-2016双搭接剪切粘结接头强度试验方法；CNS 11029-2014；CNS 11030-2014；CNS 11031-2014；CNS 11032-2014；CNS 11342-2014；CNS 11818-2014；300kN结构木材集成材力学特性试验机；GB/T15777-2017木材顺纹抗压弹性模量测定方法；GB/T1929-2009木材物理力学试材；hrjtest；GB/T50329-2012木结构试验方法标准；GB/T35217-2017锯切薄板；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017旋切单板用原木；GB/T15106-2017刨切单板用原木；GB/T1943-2009木材横纹抗压弹性模量测定；10kN人造板防火板万能试验机；120kN人造板长试样大跨度试验机；2kN石膏板断裂荷载硬度试验机；10kN瓷砖板材抗折强度试验机；300kN脚手架木模板弯曲强度试验机；GB/T14017-2009木材横纹抗拉强度试验；纸面石膏板冲击性能测定仪；1500mm门窗型材落锤冲击试验机；MHH-5N人造板划痕试验机；MGL-5N人造板滚动磨损试验机；结构胶合板厚度抗剪附具；GOST 9624胶合板抗剪强度测定附具；BS EN 789木结构试验附具；BS EN 314胶合板试验附具；BS EN 319；BS EN 326木基板拉伸剪切附具；AS/NZS 4063.1-2010结构木材拉伸试验附具；AS/NZS 4357.2层积材抗压强度测定附具；ANSI/AITC A 190.1木材产品抗弯强度测定附具；ISO 14130短梁法纤维增强塑料表观层间剪切强度夹具；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；NF B51-127-19；ASTM D5456-2010a；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；LY/T2228-2013；GB/T29897-2013；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；hrjtest；GB/T51226-2017；LY/T2388-2014；JGJ/T265-2012；2工位气弹簧动态寿命试验机；2工位气弹簧静态锁定力试验机；1kN2kN气弹簧疲劳试验机；HRJ气弹簧疲劳试验专用附具工装； 3kN长行程气弹簧疲劳试验机；1kN导电气弹簧疲劳试验机；2kN无锥度气弹簧疲劳试验机；3kN全锥度气弹簧疲劳试验机；1kN缓冲气弹簧疲劳试验机；10kN超强气弹簧疲劳试验机；1kN自由复位气弹簧疲劳试验机；3kN升降气弹簧疲劳试验机；5kN旋转气弹簧疲劳试验机；2kN拉线气弹簧疲劳试验机；微型气弹簧疲劳试验机；碳钢气弹簧疲劳试验机；2kN不锈钢气弹簧疲劳试验机；L型气弹簧疲劳试验机；1234级气弹簧疲劳试验机；5kN气压杆疲劳试验机；4kN气压杆疲劳试验机；1kN家居气压杆疲劳试验机；2kN转椅气压杆疲劳试验机；GB/T29525-2013座椅升降气弹簧技术条件；GB/T25750-2010可锁定气弹簧技术条件；空气弹簧减振器刚度疲劳试验机；GB/T25751-2010压缩气弹簧技术条件；JB/T7796-2017弹簧拉压试验机；DIN ISO 11901-1；BS ISO 11901-2；ISO 11901-3-2014；DIS ISO 11901-4；ISO 10069-1；ISO 10069-2；ANSI/BIFMA X5.1；ANSI/BIFMA X5.4；ANSI/BIFMA X5.6；ANSI/BIFMA/SOHO S6.5；ASTM D 7023；BS EN 1729-2；DIN 4550；NF D61-001；NF D62-003；UL 1286；UL 962；BS EN 1728；BS EN 1730；3工位空气弹簧高低温台架疲劳试验机；悬架空气弹簧台架疲劳寿命试验机；高速动车减振器疲劳寿命试验机；垂直阻尼弹簧隔振器疲劳寿命试验机；10工位螺旋弹簧疲劳试验机；200kN螺旋弹簧横向刚度载荷试验机；空气弹簧刚度气密性试验机；空气弹簧二维刚度疲劳试验机；200kN金属橡胶弹簧二维刚度疲劳试验机；1500kN车辆缓冲器静压力试验机；100kN空气弹簧扭转刚度试验机；橡胶弹性缓冲垫层疲劳试验机；200kN橡胶弹性体压剪疲劳试验机；100kN空气弹簧剪切试验机；300kN车辆板弹簧疲劳试验机；100kN复合弹簧刚度疲劳试验机；100kN车钩缓冲器螺旋弹簧试验机；200kN应急紧急弹簧刚度疲劳试验机；工程机械车辆刹车制动压力扭矩试验机；汽车行车制动器疲劳强度台架试验机；20kN铁路弹条疲劳试验机；3kN橡胶伸张疲劳试验机；5kN填料密封件疲劳试验机；聚合物基高分子材料拉压疲劳试验机；500N密封胶拉压疲劳试验机；250kN材料部件拉压弯疲劳试验机；50kN铝型材疲劳性能试验机；浮动油封跑合磨损泄漏性能试验机；密封圈高低温压扭疲劳试验机；履带密封圈疲劳耐久寿命试验机；空气弹簧气囊胶料物理机械性能试验机；空气弹簧荷载内压试验机；辅助弹簧垂向刚度试验机；空气弹簧系统压缩高试验机；空气弹簧水平横向大位移试验机；TB/T2841-2019铁路车辆空气弹簧；GTCC-030-2016铁道客车空气弹簧；QB/T2577橡胶空气弹簧；GB/T16947-2009螺旋弹簧疲劳试验；GB/T39519-2020；HG/T3749铁道车辆用空气弹簧橡胶囊；座椅弹簧扭矩疲劳试验机；涡卷弹簧疲劳强度试验机；调角器弹簧扭转疲劳试验机；涡卷弹簧静态扭矩试验机；齿板调节弹簧疲劳试验机；玻璃升降器弹簧扭转试验机；2工位气压棒疲劳试验机；螺旋弹簧高低温疲劳试验机；JB/T11698-2013截锥涡卷弹簧技术条件；非接触型涡卷弹簧扭矩疲劳试验机；铰式销式固定涡卷弹簧疲劳试验机；V形固定涡卷弹簧扭矩疲劳试验机；衬片固定涡卷弹簧疲劳试验机；平面涡卷弹簧扭矩疲劳试验机；片弹簧动态扭矩试验机；弹簧垂向动态刚度试验机；5000N.m弹簧扭转疲劳试验机；碟簧疲劳寿命试验机；JT/T460-2001客车座椅靠背调角器技术条件；QC/T844-2011乘用车座椅用调角器技术条件；GB/T30661.3-2015体位支撑装置的静态冲击和疲劳强度测定；

Structural glued laminated timber tensile strength tester；hrjtest；Glulam for decorative use tester；Overlaid glulam for decorative use tester；Composite wood flooring tester；Scaffolding plywood tester；Structural plywood tester；Laminated veneer lumber tester；Glued laminated bamboo flooring tester；Finger-jointed lumber tester；Glued laminated timber doors and windows tester；Test method of evaluating the properties of glued-laminated timber；Bamboo laminated lumber for veneer tester； Capacities considered are shear moment and stiffness；Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading；hrjtest；Tester Fittings Supply Center；Special Test Accessories Center；Test Accessories Design Manufacture Center；Gypsum Board Breaking Load Hardness Testing Machine；Gypsum Plate Board Falling Ball Impact Tester；Falling Ball Impact Tester；Geogrid Tensile Tester；Geosynthetics Mechanics Properties Testing Machine；Geosynthetics Wide-width Tensile Tester；jnshiyanji；Technical standard for applications of geosynthetics；Tensile test for joints seams by wide-width strip method；Warp-knitted Composite Geotextiles Mechanics Tester；hrjtest；Steel-plastic Compound Geogrid Tensile Tester；Geogrid Mechanics Properties Tester；Fiber Plastic Grid Tensile Tester；Test Methods of Geosynthetics for Highway Engineering；Geonets and Geomats Tensile Tester；Woven Geotextiles Tensile tester；jnshiyanji；Geofabriforms Tensile Tester；Geomembranes Tensile Tester；Drainage Materials Tensile Tester；Drainage Geocomposite Tensile Tester；Waterproof Materials Tensile Tester；Plastic Drainboard Tensile Tester；Basalt fiber and product Mechanics Tester；Basalt fiber unidirectional fabric Mechanics Tester；Basalt fiber geogrid Mechanics Tester；Basalt fiber composite bar Mechanics Tester；hrjtest；Basalt fiber geogrid Mechanics Tester；Textiles Mechanics Tester；Woodpulp spunlaced nonwoven Mechanics Tester；Two Gas Springs Fatigue Tester；Chair height adjustment gas spring-technical specification；Lockable gas spring technical specification；Compression gas spring technical specification；Tension and Compression Spring Testing Machine；Gas Springs Used in high level chairs；Make better strength for Gas Springs standpipe；Gas springs General specifications；Gas springs Specification of accessories；Spring Force and Compact Built Height；Spring Force and Same Build Height；Pressure springs General specification；Gas Spring Fatigue Testing Machine；Pressure springs Specification of accessories；Standard for Office Furnishing-Lounge Seating-Tests；General-Purpose Office Chairs-Tests；Small Office Home Office Furniture-Tests；Safety requirements and test methods；Height adjustment of office work chairs-Safety requirements testing；Determination of strength durability and stability；Bow-spring Casing Centralizers Tester；rigid centralizer tester；hrjtest；solid centralizer tester；annual clearance for perfectly centred casing；holding force tester；restoring force tester；running force tester；sag point tester；slippage force range；standoff tester；starting force tester；Equipment for well cementing Centralizer placement and stop collar testing；Petroleum and natural gas industries Steel pipes tester；Specification for Bow-Spring Casing Centralizers；Spring Tension Compression Mechanical Properties Tester；Flake Spring Torsion Fatigue Tester；Torsion Spring Durability Tester；Spring Ruggedness Tester；Seat Leaf Spring Torsion Fatigue Tester；Seat Torsion Spring Durability Tester；Valve Spring Fatigue Tester；Clutch Diaphragm Spring Tester；Switch Spring Tester；Clock Spring Torsion Tester；jn-syj；Contact Spring Fatigue Tester；Chair Height Adjustment Gas Spring Tester；Oil Seal Spring Joint Strength Tester；Waveform Sleeve Compression Tester；Large Diameter Seal Spring Tester；Seal Element Spring Tester；Sealing Rings Spring Tester；Piston Pump Spring Compression Tester；Hydraulic Axial Piston Pump Spring Tester；Cold Coil Conical Helical Spring Tester；Hermetic Compressor Spring Tester；Bogie Coil Spring buffer Tester；Vibration Sieve Spring Load Tester；Mining Machinery Spring Load Tester；Main Steam Safety Valve Spring Load Tester；Railway Rolling Stock Spring Tester；Railway Vehicle Spring Tester；Non-contact flat spiral spring Tester；Spring Clamp Tester；hrjtest；Toys spring Tester；Little spring Tester；Steel Strand Relaxation Testing Machine；Static Load Anchoring Testing Machine；Tension Creep Rupture Strength Testing Machine；